• Skype:
Email:jianda@jian-da.com Jiangsu Jianda Drying Engineering Co.Ltd

Jiangsu Jianda Drying Engineering Co.Ltd

Product Categories
Contact Us

Contact: Sunny Shi

Mobile: +86-15189727920

Tel: +86-519-88127888

Fax: +86-519-88963888
E-mail: jianda@jian-da.com
Add: No.588, Dongqingxi Road, Dongqing Town, Changzhou City, Jiangsu Province, PR of China.
Postcode: 213114


Licoocobalt Acid Lithium Battery Material Plate Dryer

LiCoO2 Cobalt acid lithium battery material plate dryer Project description: Lithium cobalt oxide, is an inorganic compound, generally used for lithium ion secondary battery cathode material, liquid phase synthesis process, which uses polyvinyl alcohol or polyethylene glycol aqueous solution as...

Product Details

LiCoO2 Cobalt acid lithium battery material plate dryer

  Project description:
  Lithium cobalt oxide, is an inorganic compound, generally used for lithium ion secondary battery cathode material, liquid phase synthesis process, which uses polyvinyl alcohol or polyethylene glycol aqueous solution as solvent, lithium salt, cobalt salt were dissolved in PVA or PEG solution, the mixed solution is heated and concentrated to form a gel. The resulting gel is then heated and decomposed, then calcined at high temperature, and the calcined powder is milled and sieved to obtain lithium cobalt oxide powder. Used in the manufacture of mobile phones and notebook computers and other portable electronic devices' lithium-ion battery.
Jiangsu Jianda Dry Engineering Co., Ltd. developed lithium cobalt oxide dryer is your best choice.

  

  First, LiCoO2 Cobalt acid lithium battery material plate dryer principle:
  The material flows through the surface of the drying plate along the exponential helical line. On the small drying plate the material will be moved to its exterior edge and drop down to the exterior edge of the large drying plate underneath, and will then be moved inward and drop down from its central hole to the small drying plate on the next layer. 


  Both small and large drying plates are arranged alternately so as materials can go through the whole drier continuously. The heating media, which could be saturated steam, hot water or thermal oil will be led into drying plates from one end to other end of the drier. The dried product will drop from the last layer of the drying plate to the bottom layer of the body, and will be moved by harrows to the discharge outlet. The moisture exhausts from materials and will be removed from the moist discharge outlet on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate drier. The dried product discharged from the bottom layer can be packed directly. The drying capability can be raised up if equipped with supplementary devices such as finned heater, condenser for solvent recovery, bag dust filter, return and mix mechanism for dried materials and suction fan etc. solvent in those paste state and heat sensitive materials can be easily recovered, and thermal decomposition and reaction can be also carried out.


  Second, the characteristics of LiCoO2 Cobalt acid lithium battery material plate dryer:
  Low energy consumption
  1. Thin layer of materials, low speed of main shaft, small power and energy required for conveying system of materials.
  2. Dry by conducting heat so it has high heating efficiency and low energy consumption.


  Good operation environment, solvent can be recovered and powder discharge meet the requirements of exhaust.
  1. Normal pressure type: as low speed of air flow inside the equipment and moisture being high in upper part and low in lower part, dust powder could not float to the equipment, so there is almost no dust powder in tail gas discharged from the moist discharge outlet on the top.
  2. Closed type: equipped with solvent recovery device that can recover organic solvent easily from moist-carrier gas. The solvent recovery device has simple structure and high recovery rate, and nitrogen can be used as moist-carrier gas in closed circulation in order for safe operation. Especially suitable for drying of flammable, explosive and poisonous materials.
  3. Vacuum type: if the plate drier is operating under vacuum state, it is particularly suitable for drying heat sensitive materials.


If the licoocobalt acid lithium battery material plate dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of licoocobalt acid lithium battery material plate dryer, we must be your best choice. Welcome to contact us.

Related Products
Copyright © Jiangsu Jianda Dry Engineering Co.Ltd All rights reserved.
QR Code