• Skype:
Email:jianda@jian-da.com Jiangsu Jianda Drying Engineering Co.Ltd

Jiangsu Jianda Drying Engineering Co.Ltd

Product Categories
Contact Us

Contact: Sunny Shi

Mobile: +86-15189727920

Tel: +86-519-88127888

Fax: +86-519-88963888
E-mail: jianda@jian-da.com
Add: No.588, Dongqingxi Road, Dongqing Town, Changzhou City, Jiangsu Province, PR of China.
Postcode: 213114


Dl-Methionine Spin Flash Dryer

Hot air from machine bottom with suitable atomizing speed enter into the stirring and crushing room, it process raw material by cutting, shearing, blowing, floating and rotating. Then raw material is granulated through centrifugating, shearing, impacting and friction effect. This strengthens the process of heat exchange and water evaporation.

Product Details

1. Drying process is as follows

                     Raw material→ Screw feeder

                                    ↓

   steam heat exchanger→ Hot air pipe→ Flash drying host/mixing, crushing

              ↑                       ↓


       Blower                  Cyclone separator → product

                 ↑                    ↓              

        Normal Temperature Air   Cloth bag dust remover→ product

                                ↓

Induced draft fan

    

                                       Tail gas exhaust

Spin flash dryer

2. Equipment main technical parameters:take XSG-10, and mid-east area electrcity information as example:

1、 Electric power source:400V,3Phases,50HZ,79.1 Kw,The actual energy consumption 70%,About 63 KW;

Blower 15KW,Induced draft fan 55KW,Mixing motor 15KW,Feeder 3KW,discharging valve1.1KW

2、 Steam consumption:700Kg/h;

3、 quantity of heat:35×104kcal/h;

4、 Compressed air consumption:0.8m3/min,pressure 0.5~0.6MPa;

5、 Inlet temperature:~150℃;outlet air temperature:~80℃;

6、 Feeding material temperature:Normal temperature 20℃;Discharging temperature:~50℃;

7、 Product moisture content:≤5%

3.principle:

  Hot air from machine bottom with suitable atomizing speed enter into the stirring and crushing room, it process raw material by cutting, shearing, blowing, floating and rotating. Then raw material is granulated through centrifugating, shearing, impacting and friction effect. This strengthens the process of heat exchange and water evaporation.

  Materials enters into the drier through the screwing feeding ostium, under the powerful high speed effect of stirring, materials are distributed by the function of striking, friction, shearing and cutting, raw materials are instantly smashed and fully contact with hot air, they are heated and dried, the dried powder material will be raised with the hot-air flow, small particles are discharged from the ring center and collected by cyclone segregator, the rest of materials are kept by graded ring and processed by centrifugal action, throw forward to the inside wall; then, drop to bottom, smashed and dried again.


If you need further information, please contact us freely, we will do our best to cooperate with you.

 Name:Jiangmin Su

 Mobile & whatsapp:+86 13685210107

 Skype:sujiangmin249

 Email:sujiangmin@gmail.com




If the dl-methionine spin flash dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of dl-methionine spin flash dryer, we must be your best choice. Don't miss it.
Hot Tags: dl-methionine spin flash dryer, China, factory, suppliers, manufacturers, customized
Copyright © Jiangsu Jianda Dry Engineering Co.Ltd All rights reserved.
QR Code