• Skype:
Email:jianda@jian-da.com Jiangsu Jianda Drying Engineering Co.Ltd

Jiangsu Jianda Drying Engineering Co.Ltd

Product Categories
Contact Us

Contact: Sunny Shi

Mobile: +86-15189727920

Tel: +86-519-88127888

Fax: +86-519-88963888
E-mail: jianda@jian-da.com
Add: No.588, Dongqingxi Road, Dongqing Town, Changzhou City, Jiangsu Province, PR of China.
Postcode: 213114


Iron Oxide Chemical Spin Flash Dryer

Iron oxide chemical spin flash dryer Project description: Iron oxide red is also known as rust red, is red iron oxide powder, with light, high temperature and other properties. For advanced grinding materials, used in precision metal equipment, optical glass polishing. High purity is the main...

Product Details

Iron oxide chemical spin flash dryer

Project description:
Iron oxide red is also known as rust red, is red iron oxide powder, with light, high temperature and other properties. For advanced grinding materials, used in precision metal equipment, optical glass polishing. High purity is the main base of powder metallurgy, used to smelt a variety of magnetic alloys and other high-grade alloy steel.
For this material, Jiangsu Jianda Dry Engineering Co., Ltd. developed an iron oxide dryer, this equipment is based on upgrade and transformation technology of the flash dryer, have very good results.

First, the iron oxide chemical spin flash dryer Features:
A variety of feeding devices for the choice of continuous feeding stability, the process does not produce the phenomenon of bridging.
At the bottom of dryer there is the special cooling device, to avoid the material deterioration phenomenon an the bottom of the high temperature area.
Special air pressure seal and bearing cooling device, effectively extending the life of the transmission part.
Special wind blowers reduce the resistance of the device and provide the sufficient airflow for the dryer.
The drying chamber is equipped with grading ring and swirl pieces, it can adjust the fineness and final moisture of the material.
Compared with other drying methods, can effectively increase the proportion of material.
Air speed around the drying chamber is high, raw material staying time is short, equipment size is small, large output, high efficiency and quick speed.

Second, the iron oxide chemical spin flash dryer principle:
Hot air from machine bottom with suitable atomizing speed enters into the stirring and crushing room, it process raw material by cutting, shearing, blowing, floating and rotating.Then raw material is granulated through centrifugating, shearing, impacting and friction effect. This strengthens the process of heat exchange and water evaporation.At the bottom of the dryer, the larger and heavier particles are mechanically crushed under the action of a stirrer. The low moisture content particles, and the particles with smaller particle size are entrained by the rotating air stream and are further dried during the ascending process.Because gas and solid are rotated together, inertia of solid is bigger than gas and the relative velocity between solid and gas is great, this strengthens the process of heating exchange. Therefore, this machine has strong drying capacity.

If the iron oxide chemical spin flash dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of iron oxide chemical spin flash dryer, we must be your best choice. Don't miss it.

Related Products
Copyright © Jiangsu Jianda Dry Engineering Co.Ltd All rights reserved.
QR Code