• Skype:
Email:jianda@jian-da.com Jiangsu Jianda Drying Engineering Co.Ltd

Jiangsu Jianda Drying Engineering Co.Ltd

Product Categories
Contact Us

Contact: Sunny Shi

Mobile: +86-15189727920

Tel: +86-519-88127888

Fax: +86-519-88963888
E-mail: jianda@jian-da.com
Add: No.588, Dongqingxi Road, Dongqing Town, Changzhou City, Jiangsu Province, PR of China.
Postcode: 213114


Alumina Ceramic High - Speed Centrifugal Spray Dryer

Alumina ceramic high - speed centrifugal spray dryer Selection of equipment: spray dryer Overview: Alumina Liquid Color is colorless and transparent color, solid content is of 20%-25%. The nano-alumina transparent dispersion used in the use of 5-10 nm alumina, the 5-10 nm alumina is slightly...

Product Details

Alumina ceramic high - speed centrifugal spray dryer

Selection of equipment: spray dryer
Overview:
Alumina Liquid Color is colorless and transparent color, solid content is of 20%-25%. The nano-alumina transparent dispersion used in the use of 5-10 nm alumina, the 5-10 nm alumina is slightly larger than the original size of nano-alumina through the layers of deep processing of alumina, with significant Nano-blue phase.

It is added to a variety of acrylic resin, polyurethane resin, epoxy resin, melamine resin, silicone emulsion and other resin aqueous liquid, the adding amount is of 5% to 10%, can significantly improve the hardness of the resin, hardness up to 6-8H even higher. Completely transparent, the nano-alumina liquid can be water or oily any solvent, because of its nano-particle size is very small, so regardless of what kind of solvent are transparent, and can do all kinds of glass coating materials, precious stones, precision Instrument materials and so on.

First, alumina ceramic high-speed centrifugal spray dryer principle:
Liquid from the liquid tank through the filter by the top of the dryer to the centrifugal atomizer, The hot air in a spiral is evenly entered into the dryer. Liquid from the liquid tank sent the filter to the top centrifugal atomizer, so that the liquid spray into a very small droplets of liquid droplets, liquid and hot air and flow contact, the rapid evaporation of water, in a very short time to dry the liquid droplets into finished products, finished products discharged by the bottom of the drying tower and cyclone, the exhaust gas discharged by the fan.

Second, alumina ceramic high-speed centrifugal spray dryer characteristics:
1.Drying speed is fast, the material after the atomization, the surface area greatly increased in the hot air flow, can evaporate 95% -98% of the water instantly, It takes only a 5-35 seconds to complete the drying process, especially suitable for drying heat-sensitive materials.
2. Since the drying is done in hot air, the product is substantially spherical in shape similar to the droplets, with good dispersibility, fluidity and solubility. Simple and stable operation, easy to adjust and control, easy to automate operations.
3. The production process is simplified and the operation and control are convenient. For moisture content of 40-60% (special materials up to 90%) of the liquid can be dried to a powder product, dry without grinding and screening, reduce production processes and improve product purity.
4. The feed solution may be a solution, a slurry, an emulsion, a suspension, a paste or a melt, or even a filter cake.

If the alumina ceramic high - speed centrifugal spray dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of alumina ceramic high - speed centrifugal spray dryer, we must be your best choice. Don't miss it.

Related Products
Copyright © Jiangsu Jianda Dry Engineering Co.Ltd All rights reserved.
QR Code