• Skype:
Email:jianda@jian-da.com Jiangsu Jianda Drying Engineering Co.Ltd

Jiangsu Jianda Drying Engineering Co.Ltd

Product Categories
Contact Us

Contact: Sunny Shi

Mobile: +86-15189727920

Tel: +86-519-88127888

Fax: +86-519-88963888
E-mail: jianda@jian-da.com
Add: No.588, Dongqingxi Road, Dongqing Town, Changzhou City, Jiangsu Province, PR of China.
Postcode: 213114


Urea Formaldehyde Resin Plastic Resin High-Speed Centrifugal Spray Dryer

Urea formaldehyde resin plastic resin high-speed centrifugal spray dryer First, the material overview: Urea-formaldehyde resin, urea and formaldehyde in the role of the catalyst, shrink into the initial urea-formaldehyde resin, and then in the role of curing agent or additives, form insoluble,...

Product Details

Urea formaldehyde resin plastic resin high-speed centrifugal spray dryer

First, the material overview:
Urea-formaldehyde resin, urea and formaldehyde in the role of the catalyst, shrink into the initial urea-formaldehyde resin, and then in the role of curing agent or additives, form insoluble, non-melting late thermosetting resin. After curing the urea-formaldehyde resin color is lighter than the phenolic resin, it is translucent, resistant to weak acid, weak alkaline, good insulation properties, excellent wear resistance, cheap, it is the largest specie of adhesives.
Through the Jiangsu Jianda Dry Engineering Co., Ltd. developed urea-formaldehyde resin dryer for drying, this equipment is spray drying technology based on the upgrading and transformation.

Second, Urea formaldehyde resin plastic resin high-speed centrifugal spray dryer principle:
The feed liquid is sent to a centrifugal atomizer mounted at the top of the drying tower, and the liquid is sprayed into a very small droplet through a high-speed rotating atomizing disk. The hot air go through a hot air distributor mounted at the top of the drying tower, evenly distributed in the drying tower, the two full contacted, so that it get finished products in the rapid evaporation of water in a very short period of time, the finished product comes from the bottom of the drying tower, cyclone separator (bag filter), The tail gas exhausted outside by the fan.

Third, Urea formaldehyde resin plastic resin high-speed centrifugal spray dryer characteristics:
1, In order to extend the drying time, make full use of the drying chamber of the cone section, the design of the drying room is not discharging material. To prevent the product stuck at the corner and cause accumulation of materials, in the site installed an accelerator or called anti-blocking device, the operation of a number of projects proved it has very good effects.
2, Pulse bag filter bag design to the withdrawal type, easy to replace.
3, Due to high exhaust air temperature, in the dust chamber set a set of over-temperature cold air automatically enter device, to ensure the safe operation of the pulse bag filter.
4, In order to ensure the clean of the dry medium, in the blower air inlet designed primary, middle efficiency 2-degree filters. Between the outlet of the blower and the electric heater, set the high temperature and high efficiency air filter to ensure that the product is not contaminated.

If the urea formaldehyde resin plastic resin high-speed centrifugal spray dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of urea formaldehyde resin plastic resin high-speed centrifugal spray dryer, we must be your best choice. Don't miss it.

Related Products
Copyright © Jiangsu Jianda Dry Engineering Co.Ltd All rights reserved.
QR Code